CHAPTER 8 - PXG600E CONFIGURATION WEB PAGE
EATON
PXG600E User Manual • IM02603003E
Rev 5, 11-May-2012 • Firmware Version 5.03:3835
84
7.
If there is more than one Bus in the system, select the Bus to which the
new device will be added
(Figure 81, A)
.
NOTICE: Remember that this example is installing an IQMESII
meter point so make sure the bus you choose has an IQMESII
submaster installed on it.
Figure 81
8.
Click on the
button
(Figure 81, B)
to proceed to
Step 10
if you are
satisfied with your selection.
9.
Click on the
button
(Figure 81, C)
to go back to
Step 3
if you wish
to change the selection.
10.
Select the type of device from the “What is the Device Type” drop-down
menu
(Figure 82, A)
.
Note that for this example IQMESII meter
point is the only choice that is compatible with the Meter Point
that was chosen in
Step 4
.
11.
Click on the
button
(Figure 82, B)
to proceed to
Step 13
if you are
satisfied with your selection.
12.
Click on the
button
(Figure 82, C)
to go back to
Step 3
if you wish
to change the selection.
Figure 82
PXG600E_318
A
C
B
PXG600E_319
A
B C
