CHAPTER 8 - PXG600E CONFIGURATION WEB PAGE
EATON
PXG600E User Manual • IM02603003E
Rev 5, 11-May-2012 • Firmware Version 5.03:3835
44
COM1 Configuration
NOTICE: Configure COM1 before adding “downstream” devices.
COM1 Configuration allows you to change parameters in the COM1 network.
1.
To access the COM1 Configuration, click on the COM1 link
(Figure 33, A)
in the toolbar of the PXG600E configuration web page.
Figure 33
2.
Select the Protocol from the PROTOCOL drop-down menu
(Figure 33, B)
.
There are two items to select from in this menu:
a.
Modbus
b.
QCPort
NOTICE: Make sure you do not have any devices connected to
the COM1 port when you change the PROTOCOL. If there are
devices connected, you will get the error message shown in
Figure 34
when you try to save the value.
Figure 34
PXG600E_274
C
D
B
A
F
E
PXG600E_033
