CHAPTER 8 - PXG600E CONFIGURATION WEB PAGE
121
EATON
PXG600E User Manual • IM02603003E
Rev 5, 11-May-2012 • Firmware Version 5.03:3835
1.
Click on the SNMP link
(Figure 126, A)
in the toolbar of the PXG600E
configuration web page.
Figure 126
2.
Click
v1 Enabled
(Figure 126, B)
to enable/disable SNMPv1. Default is
enabled.
3.
Click
v3 Enabled
(Figure 126, C)
to enable/disable SNMPv3. Default is
enabled.
SNMPv1
4.
Enter the
Read-Only Community String
(Figure 126, D)
.
5.
Enter the
Read-Write Community String
(Figure 126, E)
.
SNMPv3
6.
Authentication
- The authorization algorithm
(Figure 126, F)
is
displayed. It is not user defined.
7.
Privacy
- The privacy algorithm
(Figure 126, G)
is displayed. It is not
user defined.
8.
Enter
Read-Only User Name
(Figure 126, H)
.
9.
Enter
Read-Only Password
(Figure 126, I)
. Maximum limit 30
characters.
10.
Enter
Read-Write User Name
(Figure 126, J)
.
11.
Enter
Read-Write Password
(Figure 126, K)
. Maximum limit 30
characters.
Trap
12.
Enter the
Trap Recipient Community String
(Figure 126, L)
.
13.
Enter the
Trap Recipients (IP/Host Name)
(Figure 126, M)
and click on
the
button
(Figure 126, N)
to add additional Trap Recipients.
14.
When you are done adding all of the trusted hosts, you can SAVE ALL
SETTINGS, VIEW CHANGES or DISCARD CHANGES that you have
made. For details on how to use these functions, see
Common
PXG600E Configuration Functions on page 39
.
PXG600E_361
B
C
D
E
F
A
G
H
I
J
K
L
M
N