CHAPTER 8 - PXG600E CONFIGURATION WEB PAGE
EATON
PXG600E User Manual • IM02603003E
Rev 5, 11-May-2012 • Firmware Version 5.03:3835
76
Procedure for Submaster
The PXG600E supports various types of submasters. Some types of
submasters are communications centers that allow the PXG600E to monitor
many devices that have similar communications protocols. This simplifies
the network communications wiring. For example, the Breaker Interface
Module II (BIM II) is a communications center that is designed to monitor up
to 50 remote points which may include a combination of Digitrip OPTIM Trip
Units and IQ Energy Sentinels. Only the BIM II is connected directly to the
PXG600E instead of each individual remote point.
Other types of submasters allow the PXG600E to monitor devices that do
not have signal outputs that are compatible with COM1 or INCOM
communications protocols. For example, the IQ Multipoint Energy
Submeter II (IQMESII) is a compact multipoint meter that inputs signals from
current sensors (IQMESII meter points). The IQMESII submaster converts the
data from the current sensors to INCOM network data.
1.
Click on the
button
(Figure 72, A)
in the device list of the PXG600E
configuration web page.
Figure 72
PXG600E_309
A