CHAPTER 8 - PXG600E CONFIGURATION WEB PAGE
43
EATON
PXG600E User Manual • IM02603003E
Rev 5, 11-May-2012 • Firmware Version 5.03:3835
Configuration of Downstream Communication Ports
INCOM Configuration
INCOM Configuration allows you to change parameters in the INCOM
network.
The PXG600E supports synchronization of clocks on INCOM devices that
support the set time and date command.
1.
To access the INCOM Configuration, click on the INCOM link
(Figure 32, A)
in the toolbar of the PXG600E configuration web page.
2.
To enable the clock synchronization feature, click the ENABLE DATE/
TIME SYNC box
(Figure 32, B)
.
NOTICE: The default value of the clock synchronization feature
is enabled.
Figure 32
3.
Enter INCOM Receive Timeout Extend
(Figure 32, C)
in milliseconds.
INCOM Receive Timeout Extend is a value which is added to the default
INCOM timeout when receiving data from an INCOM device. It allows
the user to wait longer for INCOM responses from devices who may not
respond as promptly as others.
NOTICE: The default value of the INCOM Receive Timeout
Extend feature is zero.
4.
Enter the PowerNet IP address
(Figure 32, D)
(format aaa.bbb.ccc.ddd).
If the PXG600E is used as an EMINT in a PowerNet device server, enter
the IP address of the PowerNet device server in this field. This will
ensure that the PXG600E will only respond exclusively to that PowerNet
device server broadcast messages.
5.
You can SAVE ALL SETTINGS, VIEW CHANGES or DISCARD CHANGES
that you have made. For details on how to use these functions, see
Common PXG600E Configuration Functions on page 39
.
PXG600E_273
A
B
C
D
