CHAPTER 8 - PXG600E CONFIGURATION WEB PAGE
EATON
PXG600E User Manual • IM02603003E
Rev 5, 11-May-2012 • Firmware Version 5.03:3835
124
Email Parameters for Individual Recipients
You can send the event and periodic emails up to ten different recipients.
You can specify the type of email that each recipient will receive.
1.
Select the ID for the recipient from the drop-down
(Figure 127, F)
. The
IDs are numeric values from “01” to “10.”
2.
Click the
Send on Event Active
box
(Figure 127, G)
if the recipient will
receive an email every time the PXG600E detects an event. The default
value is un-checked.
3.
Click the
Send on Event Close
box
(Figure 127, H)
if the recipient will
receive an email every time the PXG600E detects that the condition that
caused an event has cleared. The default value is un-checked.
4.
Click the
Attach Event Log File to Event Emails
box
(Figure 127, I)
if the
recipient will receive an event email (when an event is detected or
cleared) with an event log attached to it. The default value is un-checked.
5.
Click the
Send Periodic Status
box
(Figure 127, J)
if the recipient will
receive periodic status emails.
6.
Enter the hour of day the periodic status email is sent using the
Hour of
Day for Periodic Status Email
drop-down
(Figure 127, K)
.
7.
Enter the number of minutes after the hour of day the periodic status
email is sent using the
Minute of Day for Periodic Status Email
drop-
down
(Figure 127, L)
.
8.
Enter the number of days between periodic status emails in the
Days
Between Periodic Status Email
box
(Figure 127, M)
. Value must be an
integer between 1 and 100.
9.
Enter the email address of the recipient in the
To
box
(Figure 127, N)
.
10.
When you are done adding all of the email parameters, you can SAVE
ALL SETTINGS, VIEW CHANGES or DISCARD CHANGES that you have
made. For details on how to use these functions, see
Common
PXG600E Configuration Functions on page 39
.
