CHAPTER 8 - PXG600E CONFIGURATION WEB PAGE
123
EATON
PXG600E User Manual • IM02603003E
Rev 5, 11-May-2012 • Firmware Version 5.03:3835
Email Parameters for All Recipients
1.
Click on the EMAIL link
(Figure 127, A)
in the toolbar of the PXG600E
configuration web page.
NOTICE: When you enter the configuration for any Application
Server (such as Access Control and email) you will be asked for
the address of the host or server. If you enter the name of the
server instead of the IP address you MUST enter the IP address
of at least one Domain Name Server in a Name Server box
Manually Enter IPv4 Address on page 103
.
2.
Enter the
SMTP Server IP / Hostname
(Figure 127, B)
.
3.
Enter the
SMTP Username
(Figure 127, C)
. This is an optional entry.
This entry is only required if your SMTP server requires a username and
password to
SEND
an email.
4.
Enter the
SMTP Password
(Figure 127, D)
. This is an optional entry.
This entry is only required if your SMTP server requires a username and
password to
SEND
an email.
Figure 127
5.
Enter the
From
address
(Figure 127, E)
. This will be the address of the
sender when the emails are sent. The address can be up to 40 alpha
numeric characters. Special characters include the “@” symbol and “_”
underline. The default value is “[email protected].”
PXG600E_362
B
C
E
D
F
A
H
G
J
L
K
M
N
I
