CHAPTER 7 - ACCESSING THE PXG600E
EATON
PXG600E User Manual • IM02603003E
Rev 5, 11-May-2012 • Firmware Version 5.03:3835
34
4.
Login to the PXG600E home page.
a.
Open a browser and enter the static IP address identified by your
network administrator (see
Connecting to an Ethernet LAN on
page 205
for details).
b.
An example of entering the static IP address configured at the
factory is shown
(Figure 21, A)
.
NOTICE: This is only an example of entering the static IP
address that was configured at the factory and not
necessarily the address that you will need for your
configuration. Check with your network administrator.
Figure 21
NOTICE: You may establish a secure connection by using
“https://*” where the “*” represents the actual static IP
address.
NOTICE: To establish a secure connection, you must install
the root certificate for the PXG600E. Refer to the
procedures listed in the
Root Certificate Authority
Installation on page 207
.
PXG600E_020
A
