17
Beechcraft Bonanza 15e ARF Assembly Manual
□
Step 6
Pass the nylon pushrod housing through the holes
in the lower right side of the firewall and fuselage
bulkheads, then through the slot and hole in the
radio tray.
□
Step 7
Adjust the tube until it is flush with the front of the
firewall then apply canopy glue to secure it at each
point where it passes through the fuselage structure.
□
Step 8
Slide a silicone keeper onto the steering cable then
insert the cable into the housing.
□
Step 9
Place the servo between the mounting rails with the
output shaft towards the front. Use the steering cable
to position the servo by inserting it into the pushrod
connector.
□
Step 10
Mark the servo mounting holes with a pencil.
Cutting a bevel on the end of the pushrod
housing will make it much easier to insert
through the holes in the fuselage bulkheads.
