manualshive.com logo in svg

Dräger Oxylog 3000, Инструкция по эксплуатации, Страница: 83 / 138

Поделиться
Скачать
Dräger Oxylog 3000 Скачать руководство пользователя страница 83

Instructions for Use Oxylog 3000 SW 1.n

83

Configuration

1

Briefly press the corresponding button.
The associated letter on the screen changes 
from "B" to "X". If the button has an LED, it will 
be illuminated by the device. If there are buttons 
without LED, the yellow warning LED will light 
up on the device.

2

Briefly press the 

O

 key. 

The ventilator switches OFF if it is pressed for 
longer than 3 seconds.

The function of the rotary knob is not included in the 
test.

Test loudspeaker, buzzer, LEDs and display

To test the loudspeaker, buzzer, all LEDs and the 
display:

1

Select the required test

2

Start the test. Each function is tested by the 
device.

To test the screen display (Test display):

3

Turn the rotary knob; various test cards are 
displayed.

The selected test remains active until the rotary 
knob is pressed again.

Display accu (battery) and supply data

The parameters of the replaceable battery and the 
status of the external power supply are displayed.

Display (example):

1

Advance to the second page:

2

Select the line 

Page

, confirm and turn rotary 

knob.

Display (example):

09537170

09

637170f

11637170

Содержание Oxylog 3000











































































































































Отзывы:

Нет отзывов