Dräger Oxylog 3000 Скачать руководство пользователя страница 104

Страница: 104 / 138

Maintenance

104

Instructions for Use Oxylog 3000 SW 1.n

Maintenance intervals

Inspection

examination of actual condition.

Service

measures to maintain specified
condition.

Repair

measures to restore specified
condition.

Maintenance inspection, service, and repair,

where necessary.

Preventive
Maintenance

maintenance measures at regular
intervals.

CAUTION

In order to avoid malfunctioning of the device,
maintenance must be carried out by properly
trained service personnel.

CAUTION

Have the ventilator inspected and serviced at
regular two-year intervals.

Keep a record on all preventive maintenance.

WARNING
Clean and disinfect the device or device parts
before each maintenance step – and also
when returning for repair to prevent risk of
infection.

Task

Frequency

Performed by

Replace dust filter.

Every two years.

Trained service personnel.

Replace internal battery.

– Every two years
– When the battery no longer

remains charged for the speci-
fied operating time

Trained service personnel.

Device inspection and maintenance.

Every two years.

Trained service personnel.

1) The dust filter can be treated as household waste.
2) Refer to "Technical Data" section for the battery operating time.

Содержание Oxylog 3000











































































































































Результаты поиска

Содержание Oxylog 3000

Отзывы:

Dräger Oxylog 3000, Инструкция по эксплуатации, Страница: 104 / 138

Результаты поиска

Содержание Oxylog 3000

Отзывы: