Douwe Egberts Cafitesse 700 Скачать руководство пользователя страница 26 | Manualshive

Страница: 26 / 265

Douwe Egberts Cafitesse 700 Скачать руководство пользователя страница 26

July 2004

Installation /

Putting into Operation

2 - 14

Installation of the dispenser

•

The  dispenser  is  suitable  for  installation  on  a
flat  horizontal  counter,  table,  base  stand  or  a
table  against  a  wall.

•

At  the  back  side  of  the  dispenser,  a  mini-
mum  of  5 cm  (2  in)  is  necessary  to  ensure
sufficient  cooling.

•

Place the dispenser on the table.

Power supply cable

•

The  European  version  of  the  dispenser  is
delivered  with  a  European  5-core  mains
cable.
These  cables  can  be  changed  with  different
adapters  (e.g.  DK,  GB,  CH).
If  necessary,  install  the  required  adapter.
Change  the  power  supply  plug  when  con-
necting  to  a  3-phase  rotary  current  supply.
The  U.S.  version  of  the  dispenser  is  deliv-
ered  with  a  mains  cable  for  250 V/30 A.  For
any  other  mains  connection  configurations,
the  mains  cable  must  be  exchanged.

DENMARK ONLY:

ATTENTION:

If  the  dispenser  is  connected
in  Denmark,  the  grounded
conductor  of  the  dispenser
must  always  be  connected  to
the  mains  grounded  conductor.
The  manufacturer  recommends
the  use  of  the  power  supply
cable  adapter  (part  no.  D-1082)
to  connect  the  dispenser  to
the  Danish  3-pole  safety  plug
sockets.
Otherwise,  the  delivered  power
supply  cable  has  to  be  re-
placed  by  a  power  supply
cable  with  a  Denmark  safety
plug  type  DK  2-1A  according
to  DK-standard  107/10-1973)
(part  no.  35014700).
If  a  DK  safety  plug  fitting  to
the  original  power  supply
cable  is  available,  it  may  be
sufficient  to  replace  the  plug.

Cafitesse 700 - Installation / Puttting into Operation

«
...
24
25
26
27
28
...
»

Содержание Cafitesse 700










































































































































































































































































Отзывы:

Нет отзывов