manualshive.com logo in svg

Dot Hill Systems AssuredSAN 6004, Справочное руководство CLI, Страница: 106 / 363

Поделиться
Скачать
Dot Hill Systems AssuredSAN 6004 Скачать руководство пользователя страница 106

106 Alphabetical list of commands

set led

Description

Changes the state of the identification LED on a specified device. LEDs are described in the Setup 

Guide.

Min. role

manage

Syntax

To set a disk LED:

set led

disk 

ID

enable|disable|on|off

To set the LEDs for an enclosure and its I/O modules:

set led

[controller a|b]

enable|disable|on|off

enclosure 

ID

To set a drawer LED:

set led

drawer 

ID

enable|disable|on|off

To set a fan module LED:

set led

enable|disable|on|off

fan 

ID

Parameters

controller a|b

Optional; for use with the enclosure parameter. Specifies the I/O module to locate. This affects the 

unit locator LED on the I/O module and on the enclosure's right ear.

disk 

ID

Specifies the disk to locate. For disk syntax, see 

"Command syntax" (page 18)

. This affects the fault 

LED.

drawer ID

Specifies the drawer to locate. This affects the drawer locator LED. For drawer syntax, see 

"Command syntax" (page 18)

.

enable|disable|on|off

Specifies to set or unset the LED.

enclosure 

ID

Specifies the enclosure to locate. This affects the unit locator LED on the enclosure's right ear and on 

each I/O module.

fan ID

Specifies the fan module to locate. This affects the module’s locator LED. For fan module syntax, see 

"Command syntax" (page 18)

.

Example

Identify disk 5 in enclosure 1.

# set led disk 1.5 on

Stop identifying enclosure 1.

# set led enclosure 1 off

Identify controller B in enclosure 1.

# set led enclosure 1 controller b on

Содержание AssuredSAN 6004












































































































































































































































































































































































Отзывы:

Нет отзывов