Dot Hill Systems AssuredSAN 6004 Скачать руководство пользователя страница 18

Страница: 18 / 363

Using the CLI

</OBJECT>

</RESPONSE>

XML API optimization

The following are two ways to optimize XML API performance:

•

Use embedded objects. This allows one object to contain not only properties but also other objects. In

general, parsing a structure such as this is easier as the association between objects is simpler. This is

an alternative to using

COMP

elements.

•

Use brief mode. In brief mode, which is disabled by default, returns a subset of attributes of object

properties. The name and type attributes are always returned. Other properties can be obtained by

using the

Содержание AssuredSAN 6004












































































































































































































































































































































































Результаты поиска

Содержание AssuredSAN 6004

Отзывы:

Dot Hill Systems AssuredSAN 6004, Справочное руководство CLI, Страница: 18 / 363

Результаты поиска

Содержание AssuredSAN 6004

Отзывы: