Dot Hill Systems AssuredSAN 6004 Скачать руководство пользователя страница 357

Страница: 357 / 363

Glossary 357

Storage Networking

Industry Association

See

SNIA.

storage system

A controller enclosure with at least one connected drive enclosure. Product documentation

and interfaces use the terms storage system and system interchangeably.

syslog

A protocol for sending event messages across an IP network to a logging server.

tray

See

enclosure.

UCS Transformation

Format - 8-bit

See

UTF-8.

ULP

Unified LUN Presentation. A RAID controller feature that enables a host system to access

mapped volumes through any controller host port. ULP incorporates Asymmetric Logical Unit

Access (ALUA) extensions.

Unified LUN

Presentation

See

ULP.

unmount

To remove access to a volume from a host OS.

unwritable cache data

Cache data that has not been written to disk and is associated with a volume that no longer

exists or whose disks are not online. If the data is needed, the volume’s disks must be

brought online. If the data is not needed it can be cleared, in which case it will be lost and

data will differ between the host system and disk. Unwritable cache data is also called

orphan data.

UTC

Coordinated Universal Time. The primary time standard by which the world regulates clocks

and time. It replaces Greenwich Mean Time.

UTF-8

UCS transformation format - 8-bit. A variable-width encoding that can represent every

character in the Unicode character set used for the CLI and WBI interfaces.

vdisk

A virtual disk comprising the capacity of one or more disks. The number of disks that a

vdisk can contain is determined by its RAID level.

vdisk spare

See

dedicated spare.

virtual disk

See

vdisk.

volume

A logical representation of a fixed-size, contiguous span of storage that is presented to host

systems for the purpose of storing data.

WBEM

Web-Based Enterprise Management. A set of management and internet standard

technologies developed to unify the management of enterprise computing environments.

web-based

interface/web-browser

interface

See

WBI.

WBI

Web-browser interface. The primary interface for managing the system. A user can enable

the use of HTTP, HTTPS for increased security, or both.

Web-Based Enterprise

Management

See

WBEM.

World Wide Name

See

WWN.

World Wide Node

Name

See

WWNN.

World Wide Port Name

See

WWPN.

WWN

World Wide Name. A globally unique 64-bit number that identifies a device used in

storage technology.

WWNN

World Wide Node Name. A globally unique 64-bit number that identifies a device.

WWPN

World Wide Port Name. A globally unique 64-bit number that identifies a port.

Содержание AssuredSAN 6004












































































































































































































































































































































































Результаты поиска

Содержание AssuredSAN 6004

Отзывы:

Dot Hill Systems AssuredSAN 6004, Справочное руководство CLI, Страница: 357 / 363

Результаты поиска

Содержание AssuredSAN 6004

Отзывы: