manualshive.com logo in svg

Dot Hill Systems AssuredSAN 6004, Справочное руководство CLI, Страница: 56 / 363

Поделиться
Скачать
Dot Hill Systems AssuredSAN 6004 Скачать руководство пользователя страница 56

56

Alphabetical list of commands

When a disk group is quarantined, its disks become write-locked, its volumes become inaccessible, 

and it is not available to hosts until it is dequarantined. If there are interdependencies between the 

quarantined disk group’s volumes and volumes in other disk groups, quarantine may temporarily 

impact operation of those other volumes. 
Depending on the operation, the length of the outage, and the settings associated with the 

operation, the operation may automatically resume when the disk group is dequarantined or may 

require manual intervention. A disk group can remain quarantined indefinitely without risk of data 

loss.
A disk group is dequarantined when it is brought back online, which can occur in three ways:

•

If the inaccessible disks come online, making the disk group 

FTOL

, the disk group is 

automatically dequarantined.

•

If after 60 seconds from being quarantined the disk group is 

QTCR

 or 

QTDN

, the disk group is 

automatically dequarantined. The inaccessible disks are marked as failed and the disk group 

status changes to 

CRIT

 (critical) or 

FTDN

 (fault tolerant with a down disk). If the inaccessible 

disks later come online, they are marked as 

LEFTOVR

 (leftover).

•

The 

dequarantine

 command is used to manually dequarantine the disk group. If the 

inaccessible disks later come online, they are marked as 

LEFTOVR

 (leftover). If event 172 was 

logged, do not use the 

dequarantine

 command. Instead follow the event’s 

recommended-action text. If event 485 was logged, use the 

dequarantine

 command only as 

specified by the event’s recommended-action text to avoid data corruption or loss.

When a disk group is dequarantined, event 173 is logged.
A quarantined disk group can be fully recovered if the inaccessible disks are restored. Make sure 

that all disks are properly seated, that no disks have been inadvertently removed, and that no cables 

have been unplugged. Sometimes not all disks in the disk group power up. Check that all enclosures 

have restarted after a power failure. If these problems are found and then fixed, the disk group 

recovers and no data is lost.
If the inaccessible disks cannot be restored (for example, they failed), and the disk group’s status is 

FTDN

 or 

CRIT

, and compatible spares are available to replace the inaccessible disks, reconstruction 

will automatically begin.
If a replacement disk (reconstruct target) is inaccessible at power up, the disk group becomes 

quarantined. When the disk is found, the disk group is dequarantined and reconstruction starts. If 

reconstruction was in process, it continues where it left off.

NOTE:

The only commands allowed for a quarantined disk group are 

dequarantine

 and 

delete 

vdisks

. If you delete a quarantined disk group and its inaccessible disks later come online, the disk 

group will reappear as quarantined or offline and you must delete it again (to clear those disks).

Min. role

manage

Syntax

dequarantine

vdisk 

vdisk

Parameters

vdisk 

vdisk

The name or serial number of the disk group to remove from quarantine. A name that includes a 

space must be enclosed in double quotes.

Содержание AssuredSAN 6004












































































































































































































































































































































































Отзывы:

Нет отзывов