Dot Hill Systems AssuredSAN 6004 Скачать руководство пользователя страница 299

Страница: 299 / 363

redundancy 299

redundancy

This basetype is used by

show redundancy-mode

Table 52

redundancy properties

Name

Type

Description

redundancy-mode

string

The system’s operating mode, also called the cache redundancy mode.

•

Independent Cache Performance Mode

: For a dual-controller system,

controller failover is disabled and data in a controller’s write-back cache is

not mirrored to the partner controller. This improves write performance at the

risk of losing unwritten data if a controller failure occurs while there is data

in controller cache.

•

Active-Active ULP

: Both controllers are active using ULP (Unified LUN

Presentation). Data for volumes configured to use write-back cache is

automatically mirrored between the two controllers to provide fault tolerance.

•

Single Controller

: The enclosure contains a single controller.

•

Failed Over

: Operation has failed over to one controller because its

partner is not operational. The system has lost redundancy.

•

Down

: Both controllers are not operational.

redundancy-

mode-numeric

uint32

Numeric equivalents for

redundancy-mode

values.

•

1: Independent Cache Performance Mode

•

2: Active-Active ULP

•

3: Single Controller

•

4: Failed Over

•

5: Down

redundancy-

status

string

•

Redundant with independent cache

: Both controllers are

operational but are not mirroring their cache metadata to each other.

•

Redundant

: Both controllers are operational.

•

Operational but not redundant

: In active-active mode, one

controller is operational and the other is offline. In single-controller mode,

the controller is operational.

•

Down

: This controller is not operational.

•

Unknown

: Status information is not available.

redundancy-

status-numeric

uint32

Numeric equivalents for

redundancy-status

values.

•

0: Redundant with independent cache

•

1: Redundant

•

3: Operational but not redundant

•

4: Down

•

5: Unknown

controller-a-

status

string

•

Operational

: The controller is operational.

•

Down

: The controller is installed but not operational.

•

Not Installed

: The controller is not installed.

controller-a-

status-numeric

uint32

Numeric equivalents for

controller-a-status

values.

•

0: Operational

•

1: Down

•

2: Not Installed

controller-a-

serial-number

string

•

Controller module serial number

•

Not Available

: The controller is down or not installed.

controller-b-

status

string

•

Operational

: The controller is operational.

•

Down

: The controller is installed but not operational.

•

Not Installed

: The controller is not installed.

Содержание AssuredSAN 6004












































































































































































































































































































































































Результаты поиска

Содержание AssuredSAN 6004

Отзывы:

Dot Hill Systems AssuredSAN 6004, Справочное руководство CLI, Страница: 299 / 363

Результаты поиска

Содержание AssuredSAN 6004

Отзывы: