Dot Hill Systems AssuredSAN 6004 Скачать руководство пользователя страница 222

Страница: 222 / 363

222 XML API basetype properties

advanced-settings-table

This basetype is used by

show advanced-settings

Table 8

advanced-settings-table properties

Name

Type

Description

background-

scrub

string

Shows whether disks in disk groups are automatically checked for disk defects to

ensure system health. The interval between a scrub finishing and starting again

is specified by the

background-scrub-interval

parameter.

•

Disabled

: Background disk-group scrub is disabled. This is the default.

•

Enabled

: Background disk-group scrub is enabled.

background-

scrub-numeric

uint32

Numeric equivalents for

background-scrub

values.

•

0: Disabled

•

1: Enabled

background-

scrub-interval

uint16

Shows the interval between background disk-group scrub finishing and starting

again, from 0 to 360 hours. The default is 24 hours.

partner-

firmware-

upgrade

string

Shows whether component firmware versions are monitored and will be

automatically updated on the partner controller.

•

Disabled

: Partner firmware upgrade is disabled.

•

Enabled

: Partner firmware upgrade is enabled. This is the default.

partner-

firmware-

upgrade-numeric

uint32

Numeric equivalents for

partner-firmware-upgrade

values.

•

0: Disabled

•

1: Enabled

utility-

priority

string

Priority at which data-redundancy utilities, such as vdisk verify and reconstruct,

run with respect to I/O operations competing for the system's processors. (This

does not affect vdisk background scrub, which always runs at “background”

priority.)

•

High

: Utilities have higher priority than host I/O. This can cause heavy I/O

to be slower than normal. This is the default.

•

Medium

: Utility performance is balanced with host I/O performance.

•

Low

: Utilities run at a slower rate with minimal effect on host I/O.

utility-

priority-

numeric

uint32

Numeric equivalents for

utility-priority

values.

•

0: High

•

1: Medium

•

2: Low

smart

string

Shows whether SMART (Self-Monitoring Analysis and Reporting Technology) is

enabled or disabled for disks.

•

Detect-Only

: Each disk in the system retains its individual SMART setting,

as will new disks added to the system.

•

Enabled

: SMART is enabled for all disks in the system and will be enabled

for new disks added to the system. This is the default.

•

Disabled

: SMART is disabled for all disks in the system and will be

disabled for new disks added to the system.

smart-numeric

uint32

Numeric equivalents for

smart

values.

•

0: Detect-Only

•

1: Enabled

•

2: Disabled

Содержание AssuredSAN 6004












































































































































































































































































































































































Результаты поиска

Содержание AssuredSAN 6004

Отзывы:

Dot Hill Systems AssuredSAN 6004, Справочное руководство CLI, Страница: 222 / 363

Результаты поиска

Содержание AssuredSAN 6004

Отзывы: