Dot Hill Systems AssuredSAN 6004 Скачать руководство пользователя страница 122

Страница: 122 / 363

122 Alphabetical list of commands

set vdisk

set vdisk-spare (Deprecated)

Use

add spares

Description

Changes parameters for a specified vdisk. This command applies to linear storage only.

Min. role

manage

Syntax

set vdisk

[name

new-name

]

[owner a|b]

[spin-down-delay

delay

]

vdisk

Parameters

name

new-name

Optional. A new name for the vdisk. A name that includes a space must be enclosed in double

quotes.

owner a|b

Optional. The new owner: controller A or B.

CAUTION:

Before changing the owning controller for a vdisk, you must stop host I/O to the vdisk’s

volumes. Volume mappings are not affected.

IMPORTANT:

Changing ownership of a vdisk while any volumes in the vdisk are mapped to live

hosts is not supported and may cause data loss or unavailability. All volumes in the vdisk must be

unmapped or attached hosts must be shut down before the ownership of a vdisk is changed.

spin-down-delay

delay

Optional. Sets the period of inactivity after which the vdisk’s disks and dedicated spares

automatically spin down, from 1 to 360 minutes. Setting the delay to 1–360 minutes will enable spin

down. Setting the delay to 0 will disable spin down.
Drive spin down affects disk operations as follows:

•

Spun-down disks are not polled for SMART events.

•

Operations requiring access to disks may be delayed while the disks are spinning back up.

vdisk

The name or serial number of the vdisk to change. A name that includes a space must be enclosed

in double quotes.

Example

Rename vdisk

VD1

VD2

and set its spin-down delay to 10 minutes.

# set vdisk name VD2 spin-down-delay 10 VD1

Содержание AssuredSAN 6004












































































































































































































































































































































































Результаты поиска

Содержание AssuredSAN 6004

Отзывы:

Dot Hill Systems AssuredSAN 6004, Справочное руководство CLI, Страница: 122 / 363

Результаты поиска

Содержание AssuredSAN 6004

Отзывы: