Dot Hill Systems AssuredSAN 6004 Скачать руководство пользователя страница 170 | Manualshive

Страница: 170 / 363

Dot Hill Systems AssuredSAN 6004 Скачать руководство пользователя страница 170

170 Alphabetical list of commands

show maps

Description

Shows information about mappings between volumes and initiators. If no parameter is specified, this

command shows explicit mappings (but not default mappings) for all volumes.
In a dual-controller system, if a mapping uses corresponding ports on both controllers, such as A1

and B1, the Ports field will simply show 1.

Min. role

monitor

Syntax

show maps

[all]

[initiator]

[

IDs

]

Parameters

all

Optional. Shows mappings of all access types:

read-write

,

read-only

,

no-access

, and

not-mapped

(default mappings). If this parameter is omitted, mappings of type

not-mapped

are

not shown.

initiator

Optional. Shows mapping information by initiator. If this parameter is omitted, mapping information

is shown by volume.

IDs

Optional. A comma-separated list of the names or serial numbers of initiators or volumes for which to

show mappings. Do not include both initiators and volumes in a list. A name that includes a space

must be enclosed in double quotes.

Output

Properties are described in alphabetical order.

Access

Type of host access to the volume:

•

read-write

: Read and write.

•

read-only

: Read only.

•

no-access

: No access (masked).

•

not-mapped

: Not mapped.

ID

Shown by the

initiator

parameter.

•

For a SAS initiator, its WWPN.

Host-Port-Identifier

•

For a SAS initiator, its WWPN.

•

all other initiators

: The volume's default mapping.

LUN

•

The LUN that identifies the volume to a host.

•

Blank if not mapped or mapped as

no-access

.

Name

The name of a volume or initiator.

Nickname

•

For an initiator, its nickname.

•

Blank if not set or for

all other initiators

.

«
...
168
169
170
171
172
...
»

Содержание AssuredSAN 6004












































































































































































































































































































































































Отзывы:

Нет отзывов