Dot Hill Systems AssuredSAN 6004 Скачать руководство пользователя страница 144

Страница: 144 / 363

144 Alphabetical list of commands

show disk-parameters

Description

Shows disk settings.

Min. role

monitor

Syntax

show disk-parameters

Output

SMART

Shows whether SMART (Self-Monitoring Analysis and Reporting Technology) is enabled or disabled

for disks.

•

Detect-Only

: Each disk in the system retains its individual SMART setting, as will new disks

added to the system.

•

Enabled

: SMART is enabled for all disks in the system and will be enabled for new disks added

to the system. This is the default.

•

Disabled

: SMART is disabled for all disks in the system and will be disabled for new disks

added to the system.

Drive Write Back Cache

•

Disabled

: Disk write-back cache is disabled for all disks in the system and will be disabled for

new disks added to the system. This parameter cannot be changed.

Timeout Retry Maximum

Maximum number of times a timed-out I/O operation can be retried before the operation is failed.

Attempt Timeout

Number of seconds before an I/O operation is aborted and possibly retried.

Overall Timeout

Total time in seconds before an I/O operation is failed regardless of the

Attempt Timeout

and

Timeout Retry Maximum

settings.

Inactive Drive Spin Down

Shows whether available disks and global spares will spin down after a period of inactivity shown

by the

Inactive Drive Spin Down Delay

field.

•

Disabled

: Drive spin down for available disks and global spares is disabled. This is the default.

•

Enabled

: Drive spin down for available disks and global spares is enabled.

Inactive Drive Spin Down Delay

Shows the period of inactivity in minutes after which available disks and global spares will spin

down, from 1 to 360 minutes. The value 0 means spin down is disabled. The default is 15 minutes.

Example

Show disk settings.

# show disk-parameters

Basetypes •

drive-parameters

•

status

Содержание AssuredSAN 6004












































































































































































































































































































































































Результаты поиска

Содержание AssuredSAN 6004

Отзывы:

Dot Hill Systems AssuredSAN 6004, Справочное руководство CLI, Страница: 144 / 363

Результаты поиска

Содержание AssuredSAN 6004

Отзывы: