Dot Hill Systems AssuredSAN 6004 Скачать руководство пользователя страница 10

Страница: 10 / 363

About this guide

This guide provides information about managing a Dot Hill AssuredSAN™ storage system by using its

command-line interface (CLI).

Intended audience

This guide is intended for storage system administrators.

Prerequisites

Prerequisites for using this product include knowledge of:

•

Network administration

•

Storage system configuration

•

Storage area network (SAN) management and direct attach storage (DAS)

•

Serial Attached SCSI (SAS) and Ethernet protocols

For additional information, see Dot Hill's Customer Resource Center web site:

http://crc.dothill.com

Document conventions and symbols

CAUTION:

Indicates that failure to follow directions could result in damage to equipment or data.

IMPORTANT:

Provides clarifying information or specific instructions.

NOTE:

Provides additional information.

Table 1

Document conventions

Convention

Element

Blue text

Cross-reference links and e-mail addresses

Blue, underlined text

Web site addresses

Bold font

•

Key names

•

Text typed into a GUI element, such as into a box

•

GUI elements that are clicked or selected, such as menu and list

items, buttons, and check boxes

Italics font

Text emphasis

Monospace font

•

File and directory names

•

System output

•

Code

•

Text typed at the command-line

Monospace, italic font

•

Code variables

•

Command-line variables

Monospace, bold font

Emphasis of

file and directory names, system output, code, and text

typed at the command line

Содержание AssuredSAN 6004












































































































































































































































































































































































Результаты поиска

Содержание AssuredSAN 6004

Отзывы:

Dot Hill Systems AssuredSAN 6004, Справочное руководство CLI, Страница: 10 / 363

Результаты поиска

Содержание AssuredSAN 6004

Отзывы: