15
Donaldson Company, Inc.
Unloading and Positioning
Collector and components should be lifted only by qualified crane or fork truck operators.
Failure to lift the collector or components correctly can result in severe personal injury and/or property damage.
Label on pack slip and bill of lading will state weight as delivered.
1. Remove any crates or shipping straps.
2. Lift the packaged collector or components from transport container.
3. Use all lifting points provided.
4.
Use clevis connectors, not hooks, on lifting slings.
5. Use spreader bars to prevent damage to collector’s casing.
6.
Check the Specification Control drawing for weight and
dimensions of the collector and components to ensure
adequate crane capacity.
7. Inspect for any damage and/or missing parts and report to
freight carrier.
8. Check for any hardware which may have become loose
during shipment and tighten as necessary.
Lift collector and accessories separately and assemble after
collector is in place.
Use drift pins to align holes in section flanges during assembly.
30
o
Max
60
o
Min
Lifting
Correct Axis
Incorrect Axis
