26
LP Panelized Baghouse 684LP - 882LP
1.
Place the short panels, which make up the outside ring wall of the inlet deflector section, onto the tubesheet. The tubesheet is
used to align the panels as in previous sections. Do NOT apply sealant between the tubesheet and the short panels.
2.
Prior to setting an adjacent panel, apply sealant to all external vertical flanges within 1/8-in from flange edge as shown.
Repeat for each short panel.
3.
Once the short panels are joined and bolted, bolt the deflector plates to the ring wall and to each other.
Note: Deflector plates can be installed for clockwise rotation (shown) or counter clockwise (opposite of shown).
4.
Tighten deflector plate bolts.
5.
Lift the deflector section assembly from the tubesheet and set aside.
6.
Place the tangential inlet body panels which form the bottom ring of the inlet onto the tubesheet one panel at a time, using the
tubesheet as a template. Do NOT apply sealant to the tubesheet.
4. Tangential Inlet Assembly
Tangential Panel Assembly
tangential inlet top
tangential
inlet bottom
tangential body panel B
tangential body panel C
tangential body panel G
tangential body panel F
tangential body panel E
external
flange
bolt
hole
sealant
pattern
sealant
1/8-in
from flange
edge
flange edge
Sealant Application
tangential body panel D
