10
LP Panelized Baghouse 684LP - 882LP
7. Repeat steps 3-4 for each bag.
Note: The cleaning arm will need to be manually rotated to access some bags.
8. Remove all dirty bags through hopper access door.
9.
From the clean-air plenum, carefully insert the snap band filter bag through the tubesheet with the closed end oriented
downward.
10.
Snap the bag in place with the tubesheet between the upper and lower rings on the filter bag collar. See Filter Installation
illustration.
11.
Slide the filter cage into the filter bag and seat firmly.
12. Repeat steps 7-9 for all bags.
Note: The cleaning arm will need to be manually rotated to access some bags.
13.
Once all bags are installed, ensure the cleaning arms rotate smoothly.
14. Close and tighten clean-air plenum access door.
15. Follow start-up sequence to return collector to service.
