11
SIGNAL 2
SIGNAL 3
Unbalance
The LED lights on immediately after an unbalance situation, indicating the operator
that the machine is experiencing unbalance, at least once, during the execution of the
programme. It lights off when the cycle or programme finishes.
Feeding fault
The LED is activated together with the buzzer in intervals of 1 sec. indicating that a
fault in the feeding of the machine has occurred. The LED and the buzzer disable
immediately after the start or reset.
Programming is carried out through three levels:
1.-
Wash engines programming
Access code 45
It allows preparing the wash engines in 15 different working modes.
For each modality, it allows to define the clockwise, pause, and anticlockwise
rotation time.
2.-
Cycle programming
Access code 12
It consists of linking a certain step sequence to activate or disable the different
functions (for example, drainage, cold water load, detergent inlet, spin engine,
etc.). In order to advance to the following step a certain level, a selected
temperature or a preselected time must be reached. Five different cycles are
available: Prewash, wash, rinse, spin and unroll. Each cycle must be assigned
with a number from 1 to 99.
3.-
Programme setting
Access code 27
It consists of linking, with the desired sequence, the different cycles of: prewash,
wash, rinse, distribution and spin. It is possible to memorise up to 30
programmes. Each programme can be configured with a maximum of 15 cycles.
