9
2.- PROGRAMMING
2.1.- Keys description
INS
1
DEC
2
INC
3
TEMP
4
LEVEL
5
TIME
6
7
8
9
The numeric key utiThis numeric key can be used for all selections. During
programming it allows to insert a new step in an existing cycle. During execution
it allows to check the number of r.p.m. of the drum in the programmed engine.
Numeric keys that can be used in all selections.
They allow the forward or backward display of a programme or a cycle during the
editions.
If they are pressed together with TEMP or LEVEL, they allow modifying the
preselected temperature or level.
They allow increasing or reducing the time in minutes while the step is being
executed.
The numeric key can be used for all selections.
If this key is pressed during heating phase, when the real temperature is displayed, it
allows modifying temperature through INC and DEC keys.
In the rest of the phases it allows to read the current temperature.
The numeric key can be used for all selections.
If pressed during filling phase, when the display indicates the current level, it allows
reading the introduced value and the temporary modification of the same through
INC and DEC keys.
In the rest of the phases it allows to read the current temperature.
The numeric key can be used for all selections.
If pressed during filling, draining or heating phase, if the reason for a step end is a
level, or temperature, it allows displaying the WDT of the current phase.
WDT = (Watch Dog Timer)
Numeric keys that can be used in all selections.
