50
TOTAL NUMBER OF WASHES DISPLAY
ACCESS CODE 215
The EL6 is equipped with two counters to control the number of washes (programmes) carried
out.
The first counter is a simple counter with a value of 65.000 and is used for the total counting of
the number of washes.
The second counter is a preselection counter and it is used to program the maintenance intervals.
Through access code 215 it is possible to see, for a few seconds, the total number of washes
(programmes) carried out by the machine since its installation.
MAINTENANCE COUNTER DISPLAY
ACCESS CODE 216
Through access code 216 the partial number of washes (programmes) carried out since the last
maintenance service is displayed.
MAINTENANCE WARNING ERASURE
ACCESS CODE 217
This operation is obtained through access code 217.
NOTE: This operation does not reset the total number of washes to 0.
MAINTENANCE WARNING PROGRAMMING
ACCESS CODE 218
The total number of washes (programmes) can be preselected or edited through the introduction of
access code 218, the screen displays:
1000
Through the INC and DEC keys the value can be changed to 10 units for each pulse. Pressing one
of the keys variation is continuous.
Once the desired values are reached, press ENTER to confirm and exit.
SLOWING DOWN TIME
ACCESS CODE 219
Through access code 219, the slowing down time that can be preselected can be displayed, which
is initialised to 200 sec.
The screen displays:
SLOW. TIME = s200
Press ENTER followed by a new value, if you want to change the time, or RESET to exit.
NOTE 1.
The selected time refers to fast spin.
The time for slow spin is automatically a half.
NOTE 2.
If fast spin is overridden after slow spin, the slowing down time accumulated during slow spin
will be added to the time of the fast spin.
