14
2
.3.- Engines programming.
Access code 45
When pressing START and RESET simultaneously, the access code for the engines programming
will be requested with the message:
?
Entering 45 and then ENTER, will display for two seconds:
EDIT
MOTORS
Enter the number of the engine action to be programmed (1 to 15):
MOTOR
No.
When entering the required name, two situations will possible:
1.- The engine number does not exit.
2.- The engine number does not exit.
1) The engine does not exist:
Enter the type of time rotation. The message displayed is:
T. FORWARD = S
Enter the desired time followed by ENTER. The message displayed is:
T. PAUSE = S
Enter the pause time. The message displayed is:
T. BACKWARDS = S
Enter the anticlockwise rotation time followed by ENTER, the message displayed is:
STORE
?
Press ENTER to memorise the programme. A question to enter the next access code will be
displayed:
?
Enter 45 again and press ENTER to program another engine, and continue this way until having
programmed all the necessary engines.
Press RESET to exit engines programming.
2) The selected engine exists:
In this case the message displayed will be:
ALREADY
EXISTS
!
When pressing ENTER the rotation time forward will be displayed:
T. FORWARD = XXs
Press INC and DEC to display the programme, and ENTER will enable the edition of the input
values.
After having seen or modified the rotation time backward, pressing INC or ENTER, the screen
will display:
STORE
?
Press ENTER in order to confirm the memorizing of the current programme in the memory, or the
modified one, and exit programming.
Press RESET to exit the current situation without changing the existing values.
