28
3.- PROGRAMME EXECUTION
3.1.- Programme execution.
In order to carry out a wash programme, the following steps must be followed:
¾
Put the dirty clothes in the washer-extractor drum.
¾
Close the washer extractor door
¾
Press the main switch (1) fig. 9. The pilot lights on.
When connecting the programmer, and after each self diagnosing phase, the latter is ready for
choosing a programme.
The programme execution is carried out by entering the number of the required programme and
then ENTER.
At this point the screen asks for confirmation before beginning with the programme.
Press START to execute the programme, however, by pressing RESET the number of the input
programme is overridden.
During the execution of the programme the screen will display the running cycle and the
execution parameter.
Example 1:
Cause of step end LEVEL
RINSE 1 LEVEL = cm 12
12 cm. is the current level in the tank.
If the key LEVEL is pressed, the input value as step end will be displayed for 3 seconds, during
this time, by pressing INC or DEC the input level can be changed, but only for the running cycle.
Press the key TEMP to see the real water temperature.
Press the key time TIME to see the WDT timer value, which refers to the water level.
Example 2:
Cause of step end TEMPERATURE
WASH 3 TEMPERATURE = 35 °C
35 °C is the current temperature in the tub.
By pressing the key TEMP the temperature value selected as the step end will be displayed for 3
seconds.
The use of INC and DEC keys allows the adjustment of temperature (only in the current cycle).
When pressing the LEVEL key the water level in the tub will be displayed.
When pressing the TIME key the WDT time referring to temperature is displayed.
Example 3:
Cause of step end TIME
RINSE 1 TIME = 2m 30s
In this case, the value scale in minutes and seconds is gradually displayed for the current phase.
When pressing INC or DEC the time displayed can be increased or reduced in steps of 1 minute
(only for the current cycle)
When pressing TEMP water temperature can be read
When pressing LEVEL the water level in the tank can be read.
