15
NOTE:
Work methods for the engines:
1)
FORWARD - PAUSE - BACKWARD
T. FORWARD = SXX T. PAUSE = SXX
T. BACKWARD = SXX
2)
FORWARD
-
PAUSE
T. FORWARD = SXX T. PAUSE = SXX
T. BACKWARD = S O
3)
FORWARD
T. FORWARD = SXX T. PAUSE = S O (NOT AVAILABLE)
4)
PAUSE
-
BACKWARD
T. FORWARD = S O T. PAUSE = SXX
T. BACKWARD = SXX
5)
BACKWARD
T. FORWARD = S O T. PAUSE = S O
T. BACKWARD = SXX
The minimum time with which PAUSE can be programmed between the engine forward and the
engine backward is 2 seconds.
The r.p.m. of the drum is defined when programming a step. Speed can be selected to a different
value in each step.
2.4.- Cycle programming.
Access code 12
A "Cycles Library" can be created to add the cycles within the programmes to be prepared.
With the machine in stop position, press simultaneously START and RESET, the machine will
wait to receive the access code. The screen will display:
N.
?
Enter 12 and then ENTER to enter the programming mode. The screen will display for 2 seconds:
EDIT
CYCLES
The message for the selection of the cycle to be programmed is displayed
PREWASH
=
?
When pressing IND and DEC the rest of cycles will be displayed on the screen:
WASH = ?
SPIN = ?
RINSE = ?
UNROLL = ?
Press ENTER when the desired cycle is display you will be asked to enter the identification
number of the selected cycle.
