31
POWER DOWN
If during the execution of a programme a power failure of less than 1 second occurs, this failure
will be ignored. If the power failure lasts more than 1 second, the machine will stop. When the
power supply comes back the screen displays "RE-START CYCLE ?" and the POWER-DOWN
LED of the front panel (signal 3) lights on.
If the answer is yes, (providing that slow or fast spin is not running) press the key START to start
the machine from the beginning of the interrupted cycle and the LED will light off, if you want to
stop the programme you must press the RESET key.
If the slow or fast spin was activated, the slowing down time of the engine will start automatically
by pressing the key ADVAN, disabling START and RESET momentarily.
NOTE:
This function is not activated during the execution of a simple cycle.
END OF A PROGRAMME
When the execution of a programme or a simple cycle is stopped, the message "PLEASE WAIT”
will be displayed and the buzzer is activated for 40 seconds.
When this time finishes, if the water level in the tank is below 2 cm and temperature is below 40
ºC the message "END OF ACTIVITIES" is displayed. At this moment it is possible to open the
door by pressing the key "UNLOCK DOOR".
NOTE:
Wait for 40 sec, the buzzer can be muted by pressing the key "RESET". Anyway, if after 40 sec.
temperature is above 40 ºC and the level is 2 cm, the screen will display the measured value in the
tank, and you won't be able to open the door until values are below the preselected limits.
This function is not activated during the execution of a simple cycle.
