Docomo foma SO705i, Инструкция по эксплуатации

Страница: 61 / 485

59
V
o
ic
e
/V
id
e
op
ho
ne
C
a
ll
s
● When you receive a voice or
videophone call with Chaku-moji
The Chaku-moji appears on the ringing screen. The
Chaku-moji disappears when you answer the call.
● Displaying Chaku-moji from the
Received calls record
When you receive Chaku-moji, the “ ” icon
appears on the Received calls record, and you can
check the Chaku-moji message on the “Received
calls screen (detail)”.
Editing and setting Chaku-moji
1
i
“Service” “Chaku-moji” Select
any item:
Create message
……
Stores
or edits frequently used
Chaku-moji. You can store up
to 30 Chaku-moji (including 5
pre-installed).
Highlight an item to be
stored or edited
o
(Edit)
Enter the Chaku-moji
MSG display settings
……
Sets the Chaku-moji display
setting when you receive a call with Chaku-moji.
Display all messages …… Displays all Chaku-
moji messages.
Only number in PH-book
……
Displays only
the Chaku-moji messages from senders stored
in the phonebook.
Calls with Caller ID …… Displays only the
Chaku-moji messages from senders providing
the caller ID.
Hide all messages …… Hides all Chaku-moji
messages.
Create message list screen
(p.59)
Edit …… Edits Chaku-moji.
Delete …… Selects the deleting method from “Delete this/
Delete selected/Delete all”.
“About multiple-choice”
→ p.39
z
If the receiver’s terminal is under conditions such as
followings, Chaku-moji cannot be sent. In this case, no
sending charges apply.
• The terminal is not compatible with Chaku-moji
(“Transmission failed” appears)
• Chaku-moji does not appear on the screen of the
receiver terminal because of the “MSG display
settings” on the receiver terminal (“Transmission
failed” appears)
• When Public mode (Driving mode) is set
• The ringing time for recording message is set to 0
second.
•
“ ”
or the FOMA terminal is turned off.
z
Depending on the signal status, sending result does
not appear on the sender terminal even when the
receiver terminal receives Chaku-moji. In this case,
sending charges apply.
z
You cannot send or receive Chaku-moji when using
the FOMA terminal overseas.
N
z
Even when you receive a call whose ring tone
sounded for shorter time than the time set in the “Set
mute seconds” of “Ring time (sec.)”, Chaku-moji is
displayed and recorded in the Received calls record.
z
Depending on the status of the sender or receiver,
Chaku-moji may not be displayed even if you receive a
call with Chaku-moji.
z
When the Original lock is set to “Chaku-moji”, Chaku-
moji is not displayed even if you receive a call with
Chaku-moji. In this case, Chaku-moji is stored to the
Received calls record after releasing the lock.
N
Ex. Voice call
Chaku-moji
N
z
Even when you make a call using the Received calls
record, the Chaku-moji in the record is not sent.
N
z
You cannot delete the pre-installed Chaku-moji. Even
when you change a pre-installed Chaku-moji and
delete the Chaku-moji, it is restored to the default.
Create messa g e list
Function menu p.59