Docomo foma SO705i, Инструкция по эксплуатации

Страница: 261 / 485

259
D
ata D
isp
lay/
E
d
it
/M
an
ag
emen
t
● Receiving all data at a time
1 Receive Ir data screen (p.258)
“Receive all”
2
Enter your security code Enter
session number
“Session number” → p.257
3
Direct the Infrared data port toward the
other part’s device “YES”
■
To cancel receiving all Ir data
“NO”
4
Select “YES” when the overwrite
confirmation screen appears
■
To cancel receiving all Ir data
“NO”
5 Receive all data from other party’s device
All the data reception starts.
When the received data is saved, a notification
message appears indicating that the
communication is completed.
■
To exit during the receiving
o
(Quit)
Forwarding Data with iC
Communication
<iC Communication>
When transferring data using the iC
Communication
z
Place the FeliCa mark “
e
” on the FOMA terminal
(sender) over the FeliCa mark “
e
” on the FOMA
terminal (receiver).
z
Data transmission may not be smooth depending
on the FOMA terminal of the other party. Move
FOMA terminals so that the FeliCa marks “
e
” of
the sender and the receiver get close or distant, or
move them to the right, left, up and down.
Transferring one data at a time using
the iC communication
<iC transmission/Touch to receive data>
You can exchange one data at a time with other
devices using the iC communication function.
●
Sending one data
Select “iC transmission” from the function menu of
Data list screen or detail screen.
<Example: Send one phonebook data>
1
Phonebook detail screen (p.79)
u
(FUNC) “iC transmission”
2 Put the FeliCa mark “
e
” close to the
FeliCa mark “
e
” of the other party
“YES”
The data transmission starts.
When the data is sent, a notification message
about completing the exchange appears.
■ To cancel sending
“NO”
■
To exit during sending
o
(Quit)
● Receiving one data
1
Put the FeliCa mark “
e
” close to the
FeliCa mark “
e
” of the other party
Perform the operation to send the data
from the FOMA terminal of the other
party
The data reception starts and the progress bar
appears.
2 “YES”
When the received data is saved, a notification
message about completing the save appears.
The received data is discarded if no operation is
performed for about 30 seconds after it is
received.
■
To exit during the receiving
o
(Quit)
■
When you do not save the received data
“NO”