Docomo foma SO705i, Инструкция по эксплуатации

Страница: 140 / 485

138
Ca
m
e
ra
Using the auto timer
z
The Auto timer is reset to “OFF” each time you
finish shooting.
1 Each shooting screen
u
(FUNC)
“Auto timer” “ON” Enter the time for
the Auto timer (01 to 15 seconds in 2
digits)
“10 seconds” is the default setting.
● If you set the Auto timer
“ ” appears on the screen to indicate that the Auto
timer is set.
Pressing
d
(Record) plays the Auto timer tone and
the Auto timer starts.
The incoming call lamp flashes in blue. In addition,
the illumination lamp or “ ” on the screen flashes.
The countdown tone sounds about 5 seconds before
the shooting. The incoming call lamp flashes rapidly.
■
To cancel the Auto timer settings
u
(FUNC) “Auto timer” “OFF”
■ To stop the timer while it is running
o
(Quit) or
t
Using the Bar Code Reader
<Bar code reader>
The FOMA terminal can scan JAN codes and QR
codes using the rear camera. The scanned data
can be used for displaying/copying the text, using
the functions of Phone To/AV Phone To, Mail To,
Web To, i-
α
ppli To, or adding to bookmark/
phonebook especially in QR code. The FOMA
terminal can also scan the image, melody or
ToruCa data to play or save.
z
The FOMA terminal can save up to 5 scanned bar
codes.
z
Hold the FOMA terminal firmly to ensure that it
does not shake during the scanning.
z
When scanning bar codes, use the rear camera
and hold the FOMA terminal about 6 to
8 cm away
from the scanned code.
■ JAN codes and QR codes
z
JAN code
A bar code consisting of
vertical lines (bars) of
various widths and
spaces to represent
numbers. The FOMA terminal can scan
8 -digit
(JAN 8 ) and 13-digit (JAN13) bar codes.
* When the FOMA terminal scans the JAN code on the
right above, it is displayed as “4942 8 5711306 8 ”.
z
QR code
A type of two-dimensional codes
consisting of the horizontal and
vertical patterns to represent
numbers, alphabets, kanji, kana or
pictographs. Some QR codes
express images or melodies. Some data are
divided into several QR codes.
* When the FOMA terminal scans the QR code on the
right above, it is displayed as “ 株式会社 NTT ドコモ ”
(NTT DoCoMo, Inc.).
Scanning codes
z
Before scanning, set to the close-up mode by
moving the lens selector switch to
(macro
lens).
→
p.126
1
i
“LifeKit” “Bar code reader”
2 Position the JAN code or QR code
inside the recognition field
The scanning starts
automatically.
The recognition field is
expressed using “
┏
,
┓
,
┗
,
┛
” at the corners of the
screen.
Focus the JAN code or QR
code so that the entire
code is displayed as big as
possible inside the
recognition field.
It may take time to scan the data.
■ To cancel the scanning
d
(Quit) “OK”
■ To adjust the zoom
j
: Zooms in.
h
: Returns to default.
■ To scan the data consisting of several QR
codes
“OK”
d
(Read) Position the QR code
inside the recognition field
The FOMA terminal can scan up to 16 QR codes
expressing one data.
N
z
During the Auto timer countdown, you can shoot
manually by pressing
d
(Record).
z
The Auto timer cannot be used in M-Continuous
shooting.
Scanning
Function menu p.139