Docomo foma SO705i, Инструкция по эксплуатации

Страница: 194 / 485

192
Ma
il
● When you receive the Area Mail for the
earthquake early warning
When you receive the Area Mail, you are notified on
the description screen with beep and vibration.
The screen returns to the previous screen, when you
press any of
d
,
t
and
y
.
z
You cannot change the volume of the beep.
However, you can set the ring time for beep or the
beep ON/OFF with setting for “Beep setting” in the
“Area Mail setting”.
The ring tone for the Area Mail sounds when the
beep sound setting is set to “OFF”.
z
When Manner mode is set, the beep is determined
by “Manner mode set”.
z
Vibrator pattern links to the beep while in beep
sounding, and follows the “Mail” setting under
“Vibrator” while in incoming mail sounding.
● When you receive the Area Mail other
than the earthquake early warning
When you receive the Area Mail, you are notified on
the “Receive Area Mail” or the “Description Screen”,
then notifies them with a beep for the Area Mail (the
screen is specified by the provider).
The “Receive Area Mail” screen returns to the previous
screen, if no operation is performed or you press any
key. The description screen returns to the previous
screen, when you press any key
d
,
t
and
y
.
Setting Early Warning “Area
Mail”
<Area Mail setting>
Make the settings for receiving Area Mail.
1
Mail Setting screen (p.188) “Area Mail
setting”
“Area Mail setting” screen
appears.
2 Select any item:
Receive setting (default: No)
……
Sets whether to
receive the Area Mail.
• The confirmation message asking whether to use
Area Mail appears before setting, read the given
notes carefully and select “YES”/“NO”.
Beep setting
Beep setting (default: ON) …… Turns the beep
ON/OFF.
Beep time (default: 10 seconds) …… Sets the
beep time between 01 and 30 seconds.
Receive entry …… Registers the name of Area Mail
other than the urgent news flash that you want to
receive and Message ID. Select “<Not recorded>” at
the “Receive entry” screen, and enter “Area Mail
name” and “Message ID” after you enter your
security code. The urgent news flash is sent
regardless of the settings of Receive entry.
Composing and Sending SMS
<Compose SMS/Send>
z
Your SMS address is your “subscriber mobile
phone number”.
z
This service allows you to exchange text messages
with subscribers to overseas carriers other than
DoCoMo. For information on the supported country
and the supported overseas carriers, refer to the
DoCoMo website.
1
u
“Compose SMS”
The “New SMS” screen
appears.
2 “ <No address>” Enter an
address
Select the mail address input
method to enter the address.
Sets the e-mail address by
browsing the phonebook,
received address list or
entering text directly
→ p.166
N
z
The volume of the ring tone is set to the same volume
set at “Mail” of “Ring volume”.
z
The description screen or “Receive Area Mail” screen
may not appear when you receive the Area Mail
during using functions such as an i-
α
ppli or the
camera.
Area Mail setting
New SMS
Function menu p.193