Docomo foma SO705i, Инструкция по эксплуатации

Страница: 92 / 485

90
S
o
un
d/
S
c
re
e
n
/L
ig
ht
S
e
tt
in
gs
Setting the Vibration to Notify
You of Incoming Calls
<Vibrator>
You can set different vibration patterns to notify you
when you receive a voice call, videophone call or
mail.
1
i
“Settings” “Incoming call”
“Vibrator” Select an item to set the
vibration:
Select “Phone” to set the vibration for voice calls
and 64K data communication.
Select “Mail” to set the vibration for i-mode mail,
Area Mail, SMS and packet communication.
2 Select the vibration pattern:
Pattern 1-Pattern 3
……
Vibrates in each pattern.
When you switch the highlighted item while selecting
an item, the FOMA terminal vibrates in the
highlighted pattern.
Melody linkage …… The FOMA terminal vibrates in
a pattern matched to the melody set as the ring tone.
OFF …… The FOMA terminal does not vibrate.
■ Icons on the standby screen while setting the
vibration pattern
: The vibration starts when receiving either voice
or videophone calls.
: The vibration starts when receiving either mail/
MessageR/F.
: Both “ ” and “ ” are set.
Changing the Ringback Tone
<Melody Call setting>
You can set whether to change the tone heard by the
other party or not (YES/NO) when you receive a voice
call.
1
i
“Settings” “Incoming call”
“Melody Call setting” “YES” or “NO”
When you select “YES”, accesses the Melody
Call i-mode site. By connecting the i-mode site,
a packet communication charge is applied (a
packet communication charge is not applied for
setting sites).
Follow the instructions on the screen to set.
Setting the Keypad Tone
<Keypad sound>
z
Setting this function to “OFF” also disables the
battery level tone and the warning tone.
z
The keypad sound is played at the level set in
“Volume” during a call, and fixed at the same level
while not talking on the phone.
1
i
“Settings” “Other settings”
“Keypad sound” “ON” or “OFF”
Setting the Confirmation Tone
for Charging
<Charge sound>
This function sets to emit a sound when charging
starts or is completed.
z
When the screen other than Standby screen is
displayed or when Manner mode or Public mode
(Driving mode) is set, the charge sound does not
ring.
1
i
“Settings” “Other settings”
“Charge sound” “ON” or “OFF”
N
z
When the vibration is set, take care that the vibration
does not move the FOMA terminal towards fire (e.g.
on a space heater) or cause it to fall off a table, etc.
z
Even when “Melody linkage” is selected, the FOMA
terminal not always vibrates to the melody. When no
vibration pattern is set for the melody or when an
i-motion or Chaku-Uta-Full
®
is set as the ring tone, the
FOMA terminal vibrates in Pattern 2.
z
When receiving Area Mail, vibration is linked with the
beep sound (when the buzzer sounds) or follows the
settings in “Mail” under “Vibrator” (when an incoming
Area Mail sounds).
<Vibrator priority>
z
When the vibrator settings are duplicated, the priority
is assigned as follows:
①
Vibrator for “Ring tone/Image (for individual)”
② Vibrator for “Ring tone/Image (for group)”
③ Vibrator setting
N
z
Melody Call is not activated when the other party dial
up from a videophone call.