Docomo foma SO705i, Инструкция по эксплуатации

Страница: 433 / 485

12
About the FOMA PC Setting Software
By using the FOMA PC setting software, you can easily set up the followings:
d
You can also set up packet communication and 64K data communication without using the FOMA PC
setting software.
→ p.29
See p.7 for the connection between the FOMA terminal and PC.
かんたん設定 (Easy settings)
The guide walks you through the procedures for "FOMA データ通信用ダイヤルアップの作成 " (Making a new
dial-up connection for FOMA data communication) and "
通信設定最適化
" (Optimize communication settings)
together.
通信設定最適化 (Optimize communication settings)
Optimizes the communication settings of a PC before using "FOMA packet communication".
To get the most out of communication performance, it is necessary to optimize communication settings.
接続先（ APN ）の設定 (Access Point Name (APN) settings)
Sets the access point name (APN) required for packet communication.
Unlike 64K data communication, a normal phone number is not used for FOMA packet communication access
point. Before you connect, register the APN (Access Point Name) of each access point in the FOMA terminal
and assign its registration number (cid) to the connection point phone number field.
As the APN of mopera "mopera.ne.jp" is assigned to cid1 and APN of mopera U "mopera.net" to cid3 by
default, assign the APN to cid2 or between cid4 to cid10.
cid [Context Identifier]
…
a number used to manage the Access Point Name (APN) for the packet
communication registered in the FOMA terminal. It is set when registering the APN in the FOMA terminal.
NOTE
d
When the old version of FOMA PC setting software (version 4.0.0 or older, hereafter referred to Previous FOMA PC
setting software) is installed, uninstall it in advance.