Docomo foma SO705i, Инструкция по эксплуатации, Страница: 293 / 485

291 Continued on next page
O
the
r C
onv
e
ni
e
nt
Fu
nc
ti
on
s
Setting the Upper Limit of
Charge to Notify the Alarm
<Notice designate calls>
When accumulated charge displayed at “Call data”
exceeds the cost limit set in this function, you are
notified on the standby screen or with alarms.
z
The alarm notification works only once when the
accumulated charge exceeds the set cost limit.
z
Exceeding the limit does not prevent you from
making a call.
1
i
“Settings” “Call time/Charge”
“Notice designate calls” Enter your
security code
2 Select any item:
Cost limit setting
……
Sets the cost limit between
10 and 100,000 by 10 units.
Notify setting
Notify cost limit
……
Specifies whether to
notify the cost limit.
Alarm tone …… Selects an alarm tone.
Volume …… Sets the alarm tone volume
with
c
.
3
Set the respective items
o
(Finish)
● Alarm notification actions
After ending a call, the function
notifies you with the following
methods when accumulated
charges exceed the cost limit.
■ When Notify cost limit is set
to “ON” and alarm tone is
set to other than “OFF”
When the accumulated charge exceeds the preset
cost limit, the alarm tone sounds for about 5 minutes
starting 3 seconds after finishing the call, and the
notification screen appears. To stop the alarm tone,
press any key. After the notification, pressing
t
or
y
displays “ ” (Notice designate calls) shortcut
icon on the standby screen.
■ When Notify cost limit is set to “ON” and alarm
tone is set to “OFF”
When the accumulated charge exceeds the preset
cost limit, “
” (Call billing) shortcut icon appears on
the standby screen.
●
Checking details of “ ” (Notice
designate calls)
The details of Notify cost limit is displayed by
selecting “
(Notice designate calls)” shortcut icon
on the standby screen.
1
On the standby screen
d
Select
“ (Notice designate calls)” Enter
your security code
The details of “Notice designate calls” are
displayed.
2
Check the details
d
(OK)
The standby screen reappears and “ ” (Notice
designate calls) disappears.
Using the FOMA Terminal as
Calculator
<Calculator>
You can use the FOMA terminal to perform 4 different
types of arithmetical calculations (addition,
subtraction, multiplication and division).
z
The number can be displayed up to 10 digits.
Below the decimal point, up to 9 digits can be
displayed.
z
If the result of a calculation exceeds 10 digits, “.E”
is displayed.
1
i
“LifeKit” “Calculator”
Calculate
■ To calculate “23 + 57”
2 3 + 5 7 =
2 3 j 5 7 d
■ To use negative
numbers in a
calculation
To calculate using negative
amounts, simply insert “-”
before the first digit.
− 2 3 + 5 7 =
h 2 3 j 5 7 d
N
z
The charges for i-mode or packet communication, and
the charges for sending Chaku-moji are not included
in this function. To check i-mode communication
charges, see the “Mobile Phone User’s Guide [i-mode]
FOMA version” provided at the time of contract.
３／ １ ７：０５
￥３０００
Ｓｅｔ−ｕｐ ｃｏｓｔ ｌｉｍｉｔ
ｉｓ ｅｘｃｅｅｄｅｄ
Ｃｏｓｔ ｌｉｍｉｔ
Ｄａｔｅ
Calculator
Function menu p.292