Dionex ICS-900, Руководство оператора

Страница: 81 / 142

5 • Service
Doc. 065215-02 9/09
73
5.2 Replacing Tubing and Fittings
The ICS-900 is plumbed with the tubing and tubing assemblies listed below.
•
10-32 fittings (P/N 062980) and ferrules (P/N 043276) are used for most
tubing connections. For tightening requirements, refer to
Installation of
Dionex Liquid Line Fittings (Document No. 031432). The manual is included
on the Dionex Reference Library CD-ROM (P/N 053891).
•
1/8-in fittings (P/N 052267) and ferrules (P/N 048949) are used for
connections to the MMS 300 regen ports and the eluent and regenerant
bottles.
•
1/16-in fittings (P/N 052230) and ferrules (P/N 052231) are used for
connections from the front door injection port to the injection valve.
Tubing Size and Type Used For
0.125-mm (0.005-in) ID PEEK, red
(P/N 044221) Connection from pump pulse damper to
pressure transducer
0.25-mm (0.010-in) ID PEEK, black
(P/N 042690) Connections between all other system
components
0.50-mm (0.020-in) ID Tefzel®, light
blue (P/N 035519) Connection from injection port on door to
injection valve
0.75-mm (0.030-in) ID PEEK, green
(P/N 044777) Connections from injection valve to waste,
injection valve to pump pulse damper, and
cell to regenerant bottle
1.6-mm (0.062-in) ID Teflon®,
natural (P/N 014157) Connections from suppressor
Regen In
port
to regenerant bottle,
Regen Out
to waste,
pump to eluent bottle, and pump to waste
Microbore tubing kit (P/N 052324) Tubing for exchanging black 0.25-mm
(0.010-in) ID PEEK lines with red 0.125-mm
(0.005-in) ID lines (to reduce delay volumes).