Devolo dLAN 200 DSpro, Руководство пользователя

Страница: 48 / 82

Auto-configuration
|
|
devolo dLAN 200 DSpro Manual
|
48
쎲
PROFILE_MAX_TXPUT_TX.i = xxxx (in kbps)
Maximum transmission throughput (from the slave point of view: upstream)
for users with profile i. Default value is 4096 for the default profile (profile
1).
쎲
PROFILE_MAX_TXPUT_RX.i = xxxx (in kbps)
Maximum reception throughput (from the EU point of view: downstream)
for users with profile i. Default value is 4096 for the default profile (profile
1).
쎲
PROFILE_PRIORITIES.i = [0x00-0xFF]
Priorities allowed for a user of profile i. Each bit represents a priority. The
default value is 0x85, so priorities 7, 2 and 0 are allowed. To include ano-
ther priority, set the appropriate bit in the profile priorities flag.
The maxi-
mum and minimum priorities are always set even if they are not
configured (0x81).
쎲
PROFILE_UPBWLIMIT.i = [YES|NO]
In a master or a TD repeater, limit the upstream (slave’s transmission) for
users with profile i. If disabled, the user will receive tokens constantly. Every
time the master node has transmitted all required tokens to all the slaves
with upstream bandwidth limited, then it will transmit tokens to the slaves
without upstream bandwidth limited until the rest of the slaves can receive
tokens again. Default value is NO for the default profile (profile 1).
쎲
PROFILE_DWBWLIMIT.i = [YES|NO]
In a master or a TD repeater, limit the downstream (slave’s reception) for
users with profile i. If disabled, the master node will never stop transmitting
data to that user. Every time the master node has transmitted all required
data to all slaves with downstream bandwidth limited, then it will transmit
data to the slaves without downstream bandwidth limited until the rest of
slaves can receive again. Default value is NO for the default profile (profile
1).
The following parameters can be added to the profile definition but they are
not mandatory if VLAN or OVLAN is not enabled:
쎲
PROFILE_MNMT_VLAN.i = [2-4093] | %<PARAMETRIC VALUE>
Management VLAN for that user.
쎲
PROFILE_DATA_VLAN.i = [2-4093] | %<PARAMETRIC VALUE>
Data VLAN for that user.