Devolo dLAN 200 DSpro, Руководство пользователя

Страница: 33 / 82

|
Auto-configuration
33
|
devolo dLAN 200 DSpro Manual
|
this information before they request an IP through DHCP, in particular, they have
to check if they are included in a VLAN network or not. So they perform IFCP as
explained before.
As explained in Section 12.4.1, IFCP is performed in a mixed state (with VLAN
#1 and without VLAN). Finally one of the requests will succeed and the nearest
node will reply, transferring the translation table that includes:
쎲
Parameter “USE VLAN” (explained later) to fix the VLAN mode;
쎲
Parameters related to VLAN (if needed), the main one being the Manage-
ment VLAN. If the parameter USE VLAN = 1, then the dLAN 200 DSpro
adapter configures itself to use the Management VLAN included in the
translation table;
쎲
Parameter “TRANSLATION_ROOTPATH_OVLAN” (explained later).
N
OTE
: VLAN 1 is reserved in a Wisconsin PLC network.
12.5.2 Example of a Translation Table
TRANSLATION_MNMT_VLAN = 5
TRANSLATION_DATA_VLAN.1 = 10
TRANSLATION_DATA_VLAN.2 = 11
TRANSLATION_DATA_VLAN.3 = 12
TRANSLATION_DATA_VLAN.4 = 13
TRANSLATION_DATA_VLAN.5 = 25
TRANSLATION_VOIP_VLAN.1 = 30
TRANSLATION_VOIP_VLAN.2 = 31
TRANSLATION_VOIP_VLAN.3 = 32
TRANSLATION_VOIP_VLAN.4 = 33
TRANSLATION_VOIP_VLAN.5 = 45
TRANSLATION_ROOTPATH_OVLAN = 77
The node can be configured using this information and the autoconfiguration
file. When the node receives an autoconfiguration file with the following para-
meter:
VLAN_DATA_TAG = %DATA2
The correct value (11) is obtained from the translation table.