Devolo dLAN 200 DSpro, Руководство пользователя

Страница: 41 / 82

|
Auto-configuration
41
|
devolo dLAN 200 DSpro Manual
|
VLAN_DATA_TAG = %DATA3
In the second case, the parametric value must be translated to its correct value
using the translation table.
12.8.4 Supported Parameters in the Autoconfiguration File
It is important that the order in which these parameters appear in the
autoconfiguration file is preserved
.
All of the parameters that do not appear inside the autoconfiguration files keep
their default values. Parsing is case-insensitive for parameter values only (all
values except ones like the RADIUS shared secret where there is a difference bet-
ween upper and lowercase letters).
12.8.4.1 General Parameters
쎲
GENERAL_USE_AUTOCONF = [yes|no]
This is the first parameter in the autoconfiguration file. When this parameter
is set to no, all of the parameters in the file are stored in the NVRAM when
the file is downloaded, and the node boots in NVRAM mode the next time.
Default value: yes.
WARNING: When the dLAN 200 DSpro adapter boots in NVRAM mode,
IFCP is not performed, so the translation table is not exchanged between
different nodes. It is mandatory to add the translation table to all files in the
network to configure the dLAN 200 DSpro adapter for booting from
NVRAM.
쎲
GENERAL_TYPE = [HE|CPE|TDREPEATER]
Configures the type of node. Default value: CPE.
쎲
GENERAL_FW_TYPE = [MV|LV|EU]
Configures the firmware type of the node. This parameter affects the QoS
and VLAN/OVLAN configuration. Default value: LV.
쎲
GENERAL_AUTHENTICATION = [RADIUS|AUTHLIST|NONE]
Authentication method:
쑗
If RADIUS is selected, a RADIUS server is in charge of accepting new
users and assigning the profile and fw_type;
쑗
If AUTHLIST is selected, authentication is done by checking a list provi-
ded in the autoconfiguration file. This option avoids the installation of
a RADIUS server;