Auto-configuration
|
|
devolo dLAN 200 DSpro Manual
|
54
쎲
AP_CHECK_BEST_MASTER_ENABLE = [yes|no]
Enables/disables a periodical check of the best master of the access proto-
col. Default value: yes.
쎲
AP_CHECK_BEST_MASTER_PERIOD = <time>
Configures the period time of the best master check. The time is in minutes.
Default value: 180.
쎲
AP_CURRENT_MASTER_MIN_BPS = <bps_thr>
Minimum bits per symbol with the current master that forces a change of
master in check best master phase. Default value: 1750.
쎲
AP_NEW_MASTER_MIN_BPS = <bps_thr>
Minimum bits per symbol with the new master that allows a change of mas-
ter in check best master phase. Default value: 1750.
쎲
AP_RADIUS_UPDATE_PERIOD = [0-255]
Period of the RADIUS update process. A value of 0 means that no periodic
RADIUS update is performed. A value of [1-255] means that the RADIUS
update is performed with this period, in hours. Default value: 24.
쎲
ACCESSP_AUTHLIST_MAC.i = 0xXXXXXXXXXXXX
List of allowed MAC addresses. The length of the list is 128 (i=1…128).
쎲
ACCESSP_AUTHLIST_PROFILE.i = [1-16]
List of profiles associated to a MAC address. The length of the list is 128
(i=1…128). Default value: 1.
쎲
ACCESSP_AUTHLIST_FWTYPE.i = [MV|LV|EU]
List of FWTYPE. The length of the list is 128 (i=1…128). Default value: LV.
N
OTE
:
This parameter is obsolete and is maintained to ensure backwards
compatibility. The firmware type of the new node should be assigned by
means of the parameter PROFILE_FWTYPE. ACCESSP_AUTHLIST_FWTYPE is
only applied if the parameter PROFILE_FWTYPE is not defined in the corre-
sponding profile.
12.8.4.11 STP Parameters
쎲
STP_PRIO = [0-65535]
Configures the 2 bytes added to the MAC used by the STP standard to decide
the root path. Default values:
쑗
36880 = 0x9010 MV MASTER
쑗
36880 = 0x9010 MV MASTER
Содержание dLAN 200 DSpro
Страница 1: ...dLAN 200 DSpro Manual...