|
Auto-configuration
45
|
devolo dLAN 200 DSpro Manual
|
Transmission Gain Parameters (Power Control parameters)
쎲
AGC_TX_GAIN = [0|1]
Configures the transmission gain of the DSS7700. The gains are separated
in steps of 12 dB. Default value: 1.
WARNING:
If the transmission gain is configured, it will remain configured,
even if the mode changes. If the AFE is different from the DS2 AFE then it
is possible to configure the AGC_TX_GAIN from 0 to 7.
쎲
POWER_CONTROL_ENABLE = [YES | NO]
It allows the node to change its transmitted power following certain rules.
The node tries to minimize the power injected into the powerline while
maintaining a good throughput with the other nodes.
WARNING:
The power control is only allowed in CPEs. It must never be
used in a HE or TD repeater.
12.8.4.3
RADIUS Parameters
쎲
RADIUS_SERVER_IP = <ddd.ddd.ddd.ddd>
RADIUS server IP address.
쎲
RADIUS_SERVER_PORT = ddddd
RADIUS client UDP port.
쎲
RADIUS_SHARED_SECRET = <string>
RADIUS shared secret. It is limited to 16 characters.
All three parameters must be set up in order for the RADIUS client to work
properly.
12.8.4.4
Class of Service (CoS) Parameters
Using the autoconfiguration file, two classes of service criteria can be defined,
assigning priorities from 0 to 7.
쎲
COS_CUSTOM_CRITERION_OFFSET.i = [1-531]
Custom i-criterion frame offset, in bytes (i = 1, 2).
쎲
COS_CUSTOM_CRITERION_PATTERN.i = 0xXXXXXXXXXXXXXXXX
Custom i-criterion 8-byte pattern, in hexadecimal digits (i = 1, 2).
쎲
COS_CUSTOM_CRITERION_BITMASK.i = 0xXXXXXXXXXXXXXXX
Custom i-criterion 8-byte bitmask, in hexadecimal digits (i = 1, 2).
Содержание dLAN 200 DSpro
Страница 1: ...dLAN 200 DSpro Manual...