Devolo dLAN 200 DSpro, Руководство пользователя

Страница: 21 / 82

|
Using the dLAN 200 DSpro Adapter Console
21
|
devolo dLAN 200 DSpro Manual
|
Figure 12: Static
Leases list Showing
Time and Date of
recently Configured
Node
10 Using the dLAN 200 DSpro Adapter
Console
The console of the dLAN 200 DSpro adapter is interactive and allows issuing
commands and reading outputs. The possible commands are organized in
menus and the menus are organized in a tree structure. The operation is similar
to invoking programs that are placed in different directories.
Most commands will produce some output in the console. If the command was
understood, the dLAN 200 DSpro adapter will report "OK". If the command was
wrong, the dLAN 200 DSpro adapter will report "KO". The commands are typed
at the command prompt, which looks like "#user@/>".
To enter a menu, you must type the name of the menu or the short alias and
then press ENTER. For example, to enter the "network" menu, you must type
"network" or "net".
Also every command has a short name or alias. For example, instead of typing
"mode 6" you could type "m 6".
To go up to the previous menu level, you must type "..".
At any point you can type "ls" to see the list of commands available at a given
level. You can also type "help" or "h" to see additional information. There are
only two levels of directories.
There are three ways to invoke a command that is inside a submenu:
쐃
Enter the menu, and then type the command. For example, from the root
menu, type "s + ENTER" to enter the synchronization menu and then type
"m 6 + ENTER" to switch to mode 6.