Devolo dLAN 200 DSpro, Руководство пользователя

Страница: 46 / 82

Auto-configuration
|
|
devolo dLAN 200 DSpro Manual
|
46
쎲
COS_CUSTOM_CRITERION_CLASSES_OFFSET.i = [1-531]
Custom i-criterion classes frame offset, in bytes (i = 1, 2).
쎲
COS_CUSTOM_CRITERION_CLASSES_BITMASK.i=
0xXXXXXXXXXXXXXXX
Custom i-criterion classes 8-byte bitmask, in hexadecimal digits (i = 1, 2).
쎲
COS_CUSTOM_CRITERION_CLASSES_PATTERN.i.j=
0xXXXXXXXXXXXXXXX
Custom i-criterion j-class 8-byte pattern, in hexadecimal digits (i=1, 2; j =
1…8).
쎲
COS_CUSTOM_CRITERION_CLASSES_PRIO.i.j = [0-7]
Custom i-criterion j-class priority (i=1, 2; j = 1…8).
쎲
COS_CRITERION.k = [8021p|TOS|CUSTOM1|CUSTOM2]
k-criterion definition (k = 1, 2). Assigns up to 2 criteria to classify traffic.
There are two predefined criteria (8021p based on VLAN tag priority field,
TOS IP type of service), and two custom criteria defined with the parameters
above.
쎲
COS_DEFAULT_PRIO = [0-7]
Configures the CoS default priority, that is, the priority assigned to packets
that do not match a criterion. Default value: 2.
12.8.4.5 Quality of Service (QoS) Parameters
쎲
QOS_ENABLE = [YES|NO]
This parameter enables/disables the quality of service in the node. If this
parameter is set to no, all other parameters related to QoS are not configu-
red. Default value is NO.
쎲
QOS_PRIOACK.prio+1 = [0|1]
This list configures the Layer-2 ACK protocol depending on the priority
transmitted by the dLAN 200 DSpro adapter (can be useful for those appli-
cations with tough settings in latency but not in PLR). If several priorities
are sniffed, the policy will be fixed by the maximum priority detected. Keep
in mind that Layer-2 ACK does not use priorities. There is not an indepen-
dent Layer-2 ACK for every priority. If the Layer-2 ACK is disabled for one
priority (for example, the VoIP priority to obtain better performance for voice
service), then if this priority is present in the line, the Layer-2 ACK protocol
is stopped. This means that for the period when packets with this priority