|
Auto-configuration
47
|
devolo dLAN 200 DSpro Manual
|
are present, the Layer-2 ACK is not used and no packets have Layer-2 ACK,
independent of their priority. Default value: 1 for all priorities.
Slave Node Parameters (CPE or REPEATER)
쎲
QOS_MAX_TXPUT_TX = xxxx (in kbps)
Configures the maximum transmission throughput for that CPE/TDREPEA-
TER. Default value is 512 for CPEs and 4096 for TDREPEATERs.
쎲
QOS_UPBWLIMIT = [YES|NO]
In a slave, limits its own transmission. Set to YES by default in CPEs and NO
in TDREPEATERs. If disabled, the user will transmit data constantly. Every
time it receives a data token, no limit will be imposed by the slave when
transmitting data back to its master.
Master Node Parameters (HE or REPEATER)
쎲
QOS_LATENCY_STEP = [20-400] (in ms)
Configures the minimum latency step for the different slaves when using
QoS. Default value: 60.
쎲
QOS_BW_POLICY = [0|1]
Configures the policy in which the QoS manages the excess of bandwidth.
0 is fair mode and 1 is priority-based mode. Default value: 1.
쎲
QOS_LATENCY.prio+1 = [1|2|4|8]
This list configures the latency for each priority level in QOS_LATENCY_STEP
unities. Default values are:
쑗
QOS_LATENCY.1 =8
쑗
QOS_LATENCY.2 =8
쑗
QOS_LATENCY.3 =4
쑗
QOS_LATENCY.4 =4
쑗
QOS_LATENCY.5 =4
쑗
QOS_LATENCY.6 =2
쑗
QOS_LATENCY.7 =1
쑗
QOS_LATENCY.8 =8
12.8.4.6
Profile Parameters
To define a profile at least five parameters are needed. If any of them is not pre-
sent, it will take the default value:
Содержание dLAN 200 DSpro
Страница 1: ...dLAN 200 DSpro Manual...
