Devolo dLAN 200 DSpro, Руководство пользователя

Страница: 11 / 82

|
Starting Up the dLAN 200 DSpro Adapter
11
|
devolo dLAN 200 DSpro Manual
|
5 Starting Up the dLAN 200 DSpro
Adapter
It is advisable to run Wireshark during the startup and configuration of the dLAN
200 DSpro adapter in order to ascertain the correct execution of this process and
diagnose potential configuration problems.
The first sign of life exhibited by the dLAN 200 DSpro adapter are the Spanning
Tree Protocol (STP) packets. After a few STP packets, the dLAN 200 DSpro adap-
ter will issue a DHCP discover packet, as shown in Figure 1.
Figure 1: Packet Trace
of the Startup of the
Adapter
If you cannot see the DHCP packets coming from the dLAN 200 DSpro adapter,
the cause may be:
쐃
The firewall is filtering out these packets.
쐇
You are not running Wireshark on the physical Ethernet interface.
쐋
The dLAN 200 DSpro adapter does not have the factory default configura-
tion.
6 Providing an IP Address
This section describes how to give an IP address to the dLAN 200 DSpro adapter,
without actually configuring the dLAN 200 DSpro adapter. As soon as the dLAN
200 DSpro adapter has an IP address, we can access its console using the telnet
application.