Devolo dLAN 200 DSpro, Руководство пользователя

Страница: 31 / 82

|
Auto-configuration
31
|
devolo dLAN 200 DSpro Manual
|
The second method is not advisable, because the access to the console is poor
while using IFCP due to the change between VLAN/noVLAN modes. Method 1
should therefore be used if possible.
To disable IFCP through DHCP (method 1), see Section 12.12.
If no OVLANs/VLANs are going to be used in the network, the IFCP protocol can
be disabled in all of the dLAN 200 DSpro adapters. To disable IFCP manually
(method 2) in the next dLAN 200 DSpro adapter boot, see Section 12.14.1.3.
12.4.2 Incompatibilities
A slave using this version of firmware that is not using VLANs will not work with
a master that is using VLAN. The reason is that with the new FW version, the
slave always makes IFCP requests during booting, and because of that, LV nodes
always start their IFCP servers whether using VLANs or not. A master with a pre-
vious FW version that is not using VLANs does not start the IFCP server to answer
the requests of the slave, so it will not be able to complete this stage of the auto-
configuration.
12.5 Translation Table
The translation table contains information about the VLAN/OVLANs (in future
releases more parameters can be added) used for all nodes hanging from MV/
LV equipment. The autoconfiguration file of each piece of LV equipment is a
parametric file, which means that, for example, the LV equipment knows, using
the autoconfiguration file, that the VLAN DATA OPERATOR 1 is allowed. Howe-
ver the equipment needs to know what is the number of this VLAN DATA OPE-
RATOR 1 in the LV equipment.